Advanced Cutter Washing Station
3 Programmable Circulated Wash Stations
• Aqueous bulk wash
• Organic rinse station
• Ultrasonic final rinse


Customized Tube Rack
• Standard or Special racks for your tubes
• Available with or without ice baths


Hood Enclosure
• Insulated aluminum enclosure for sound
and aerosol containment. Venting adapter included
Two Autogizer Models
• Model 700 includes five Model 200 homogenizers
(1/5 hp 5,000 to 30,000 rpm)

• Model 701 includes four Model 250 homogenizers
(3/4 hp 10,000 to 30,000 rpm)

Also available with 1 to 5 sonic probes.

Flexibility
• Can run individual tubes or full racks

Fully Programmable Row by Row
with multiple operator set programs
• Up and Down Cycling with height settings
• Rate of Cycling
• Timing of Cycling
Description of Operation
The Autogizer is designed to fully automate a variety of homogenizing tasks. Model 700 is equipped with five Model 200 1/5 hp units. Model 701 is equipped with four Model 250 3/4 hp units for heavy duty tasks.

A wide range of cutter sizes are available for each model. A standard tube rack is included. Custom racks with or without ice baths are readily available.

The racks may be partially filled (1 or more) or fully filled for automated processing. The programming is by individual rows. The cutters may be oscillated up and down with the program setting speed of oscillation, upper and lower heights, time, and number of cycles in each row. The high cutter speed and versatile programming makes for quick and very efficient homogenizing.

  
Optional Aluminum
Hood Enclosure
• Provides sound and aerosol containment
• Sliding door access - Venting optional
• Shipped disassembled - Easy assembly
• Dimensions: 41" x 33" x 23" (W x H x D)
The cutters are cleaned automatically with three programmable wash stations. The first is a aqueous bulk wash station designed to be used with tap water. It provides quick, abundant washing, to effectively clean residual material from the cutters. It may not remove all fibrous material. Fibrous material may require manual intervention. The aqueous bulk wash station may also be fed from a reservoir and peristaltic pump. The wash time may have to be increased accordingly. The second wash station is for organic solvents, such as alcohol, to remove non-aqueous residuals. The third is an ultrasonic aqueous bath to serve as the final rinse. A peristaltic pump is provided to circulate the organic and ultrasonic baths. The wash waste is separated to organic or aqueous collection. The programming controls the cutters' motion and time in each wash station. Each wash station is independently programmable.
Ultrasonic Probes
The Autogizer may also be supplied with one or two ultrasonic probes. These may be 20KHz or 40KHz depending on the applications requirements. A variety of probe sizes and configurations are available to match the functions desired. See Sonic & Materials website for detailed information on the VC130 models and accessories.
TECHNICAL INFORMATION
Users outside of the USA, please specify frequency and voltage when placing an order
Utilities Physical
Input Power: Model 700: 120VAC, 50/60Hz, 6 amps
220VAC, 50/60Hz, 3 amps		 Unit Dimensions:
(W x H x D)		 19" x 32" x 39"
(482.6 x 812.8 x 990.6mm)
Model 701: 120VAC, 50/60Hz, 30 amps
220VAC, 50/60Hz, 15 amps
Power Consumption:

 230 WATT Nominal Gravity Drain: Aqueous and Organic
Ordering Information
Autogizer - five cutter automated multi-sample homogenizer (60Hz/120VAC)
Cat. No. 700
includes: one standard rack, choice of tube rack

Autogizer - four cutter automated multi-sample homogenzier (60Hz/120VAC)
(requires 30 amp service)
Cat. No. 701
includes: one standard rack, choice of tube rack

Autogizers are supplied with 7mm cutters as standard. Other sizes are available.
Users outside the USA, please specify frequency.

Please call your Local Sales Representative for current pricing.